Conductive Elastomer Discs and Sheets
An economically attractive substitute for silverfilled pastes normally used in target bonding.
When placed between the back of a (clamped, not bonded) target and the cooling well of a magnetron sputter source, these sheets enhance thermal transfer, especially for targets that have poor thermal contact or conductance.
- Made of a vacuum-compatible 0.020" thick silicone rubber
- Contain silver-coated copper powder filler
- Reusable
NOTE: For other sizes not listed, please contact our Materials Department by clicking here or call +1 800 245 1656 for pricing and availability.
Specifications
Conductive Elastomer Sheets/Discs | |
NASA Rating | Type A |
Elastomer Binder | Silicone |
Conductive Filler | Silver/Copper |
Volume Resistivity (as supplied) |
0.004 ohm-cm |
Hardness | 65 Shore |
Specific Gravity | 1.9 |
Tensile Strength | 200 psi |
Elongation | 100% |
Tear Strength | 40 lb./in. |
Compression Set (70 hrs @ 100˚) |
32% |
Low Temp Flex | -65˚C |
Max. Continuous Use Temp | 125˚C |