Representative Image
XY Aligner
Key Features
- CF40 (2.75" OD), CF64 (4.5" OD), CF100 (6" OD) mounting options
- CF40 mounting flange option provides 38mm clear bore
- CF64 & CF100 mounting flange options provide 65mm clear bore
- XY Stroke +/-10mm with 0.5mm repeatability
- Max applied load in vertical axis: 100N
- Max applied load in horizontal axis: 10Nm
The XYA provides basic X & Y manipulation for low duty-cycle applications where high precision is not required. Available in CF40 (2.75" OD) , CF63 (4.5" OD) and CF100 (6" OD) mounting flange options with clear bores of 38mm and 65mm respectively. All options provide +/-10mm of X & Y motion with typical repeatability of 0.5mm (based on mid position between 1mm increments).
If precision or motorization are required then the Multibase XY products are the right choice.
XYA40 Specifications
Traveling flange: CF40 (2.75" OD) tapped holes
- Clear bore: 38mm
- XY stroke: +/-10mm
- Typical repeatability: 0.5mm (based on mid position between 1mm increments)
- Max applied load in vertical axis: 100N
- Max applied load in horizontal axis: 10Nm
- Bakeout to 250°C
- Fully adjustable mounting orientation
Mounting flange options and part numbers
- CF40 (2.75"OD) clear holes - Part Number XYA40-40-H
- CF63 (4.5"OD) clear holes - Part Number XYA40-63-H
XY63 Specifications
Traveling flange: CF63 (4.5" OD) tapped holes
- Clear bore: 65mm
- XY stroke: +/-10mm
- Typical repeatability: 0.5mm (based on mid position between 1mm increments)
- Max applied load in vertical axis: 100N
- Max applied load in horizontal axis: 10Nm
- Bakeout to 250°C
- Fully adjustable mounting orientation
Mounting flange options and part numbers
- CF63 (4.5"OD) clear holes - Part Number XYA63-63-H
- CF100 (6.0"OD) clear holes - Part Number XYA63-100-H