Representative Image
KJLC® 615 Series Thermocouple Gauge Controller
The KJL615TC is a complete vacuum instrument. The KJL615TCE offers a Ethernet connectivity to remotely monitor and log pressure.
Each Lesker 615 gauge includes:
- A vacuum gauge controller
- A thermocouple gauge tube, tested and calibrated with controller
- 10 foot controller to gauge tube cable
- 5 foot AC power supply
- KJL615TCE - RJ45 Ethernet connectivity to allow remote monitoring of the vacuum reading. Which also has the ability to view and log vacuum data through Mozilla Firefox Extended Release Browser, 32-bit version.
Features
- Wide range measurement of 0.001-760 Torr (if using a Varian 531/536 gauge tube)
- Range of 1 millitorr to 1999 millitorr (if using a KJL6000 or DV-6M gauge tube)
- Selectable units. Torr, mBar or kPa
- 1/8 DIN or bench top mounting. Mount brackets and rubber feet included
- 100-240 VAC, 50/60 Hz power
- Display ‐ 0.56" high red LED
- 2 set point controls
- Analog output
- RS232 data port
- KJL615TCE - RJ45 Ethernet connection
- NIST traceable calibration certificates may be purchased with initial order
- Gauges are calibrated for direct readout of nitrogen or air. Do not attempt to use with other gases unless accurate conversion data for N2 to the other gas is properly used.
Dimensional Drawings
Charts
Specifications Table
| Model | 615TC | 615TC-K |
|---|---|---|
|
Technology |
Thermocouple
|
Thermocouple
|
| Measurements |
Torr Min: 1.000 x 10-3 Max: 760 mbar Min: 1.330 x 10-3 Max: 1000 |
Torr Min: 1.000 x 10-3 Max: 1.00 mbar Min: 1.330 x 10-3 Max: 1.00 |
| Temperature |
Operating 38.0 ºC 100 ºF Storage 38.0 ºC 100 ºF Bakeout 100 ºC 212 ºF |
Operating 38.0 ºC 100 ºF Storage 38.0 ºC 100 ºF Bakeout 100 ºC 212 ºF |
| Materials Exposed to Vacuum |
Glass Nickel Stainless Steel |
Glass Nickel Stainless Steel |
| Connectors |
9 pin Sub D Male |
9 pin Sub D Male |
|
Typical Accuracy |
±15% of reading
|
±15% of reading
|
|
Accuracy Range |
11 to 20%
|
11 to 20%
|
|
Display Type |
Digital
|
Digital
|
|
Set-Point Relays |
2 | 2 |
|
Relay Response |
250VAC
7A |
250VAC
7A |
|
Analog Output |
0 to 5 VDC
|
0 to 5 VDC
|
|
Recommended Mounting Orientation |
Vertical
|
Vertical
|
|
Input Power |
100-240 VAC
50/60 Hz |
100-240 VAC
50/60 Hz |
|
Compliance and Standards |
CE
RoHS |
CE
RoHS |
|
Integrated Electronics |
Yes
|
Yes
|
X CLOSE
Ordering Table
X CLOSE
| Description | Connector Type | Compatible Gauge Tubes | Communications (Standard) | Note |
|
Part Number | Price | In Stock | Add To Cart | Accessories | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Description | Connector Type | Compatible Gauge Tubes | Communications (Standard) | Note |
|
Part Number | Price | In Stock | Add To Cart | Accessories | ||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-5311 | RS232 | — |
|
|
$750.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-5311 | RS232 | — |
|
|
$961.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-6000SS | RS232 | — |
|
|
$766.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-6000SS | RS232 | 1 |
|
|
$1,064.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-6000SS | RS232 | 2 |
|
|
$570.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-5311 | RS232 | 1 |
|
|
$963.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-5311 | RS232 | 2 |
|
|
$584.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-5311 | RS232,Ethernet | — |
|
|
$1,174.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-6000SS | RS232,Ethernet | — |
|
|
$999.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-6000SS | RS232,Ethernet | 1 |
|
|
$1,150.00 |
|
|
|||||
|
CONTROLLER, |
9 pin Sub D Male | KJL-5311 | RS232,Ethernet | 1 |
|
|
$1,211.00 |
|
|
|||||
CloseX
X CLOSE
