These economical controllers are noted for their fast response and high stability.
Features
- Economical analog display
- Offer an easy, accurate calibration procedure with dry air
- Can be operated on any voltage between 100 and 240 VAC without rewiring or switching
- Available in panel-mount and benchtop-mount versions (both are compatible with the KJL-6000SS or DV-6 series tubes)
- Models with 3-position switch feature monitors 3 tubes sequentially (part#: KJL-205ABM3X)
- Includes a 10' sensor cable and one KJL-6000SS tube (1/8" NPT male)
- NIST traceable calibration certificates may be purchased with initial order
- Gauges are calibrated for direct readout of nitrogen or air. Do not attempt to use with other gases unless accurate conversion data for N2 to the other gas is properly used.
- CE, UL, and CSA marked
Specifications Table
Model | 205A |
---|---|
Technology |
Thermocouple
|
Measurements |
Torr Min: 1.000 x 10-3 Max: 1.33 mbar Min: 1.330 x 10-3 Max: 1.33 |
Temperature |
Operating 60.0 ºC 140 ºF Storage 38.0 ºC 100 ºF Bakeout 100 ºC 212 ºF |
Materials Exposed to Vacuum |
Glass Nickel Stainless Steel |
Typical Accuracy |
±15% of reading
|
Accuracy Range |
11 to 20%
|
Display Type |
Analog
|
Set-Point Relays |
1 |
Relay Response |
24VDC
1 Amp Type C |
Analog Output |
0 to 5 VDC
|
Recommended Mounting Orientation |
Vertical
|
Input Power |
100-240 VAC
50/60 Hz |
Communications (Standard) |
Analog
|
Compliance and Standards |
CE
UL CSA |
Integrated Electronics |
Yes
|
Compatible Gauge Tubes |
KJL-6000SS
DV-6M DR-6R |
X CLOSE