Models:
SD-versions for applications with dust-free, non-corrosive gases.
The SD-version is designed for applications with clean (dust-free) and non-corrosive gases. The standard pumps are equipped with gas ballast equipment in order to improve the pumping of light gases and to avoid the condensation of steam inside the pumps. Three gas ballast options fulfill the customer requirements as needed.
G-versions for usage by low quantities of corrosive gases.
The G-version may transport traces of corrosive gases. An inert flushing gas protects low pressure and high pressure bearings and dilutes the corrosive mediums in the suction chamber.
CV-versions for applications with condensible vapors.
The CV-version is specially designed for avoiding vapor condensation inside the pump block. This occurs through:
- A high gas ballast throughput for heating up pumps and diluting condensable gases.
- A silencer with drain screws for releasing liquid at the lowest point of the exhaust.
- Flushing gas injection to protect the ball bearing and the shaft seals.
- The CV version has a water vapor capacity of up to 1,000 grams per hour.
Features:
- Ideal replacement for scroll and oil-sealed pumps
- Air cooling - No installation and operational costs for water supply
- Frequency converter - Hour meter, remote operation mode (RS-485, dry contacts), multiple rotational speed selection (power saving, noise reduction, adaptation to application cycle)
- Several gas port options - Purge gas, gas ballast, other specific ports according to application
- Universal power supply - Wide voltage supply 50/60 Hz single-phase and three-phase
- Standards - Compliance with CE standards, UL/CSA certified, SEMI S2 certified
Applications:
- Electron microscopes
- Surface analyzers
- Leak detectors
- Mass spectometers
- Optical spectrometers
- Particle accelerators
- Turbo pumping stations
- Laboratories
- Lamp manufacturing
- Vacuum coating
- Cryo pumps regeneration
- Plasma cleaning
- Drying
- Load-lock
Videos
Pfeiffer Vacuum multi-stage Roots pump ACP
The multi-stage Roots pump technology of the ACP series meets the requirements of applications where a clean and dry vacuum is needed.
Runtime: 2:02
Specifications Table
Specifications Table
Pump Model | ACP 28 | ACP 15 | ACP 40 | ACP 90 |
---|---|---|---|---|
Pumping Speeds |
50 (Hz)
15.9 CFM 27.0 m3/hr
60 (Hz)
15.9 CFM 27.0 m3/hr |
8.24 CFM 14.0 m3/hr
50 (Hz)
8.24 CFM 14.0 m3/hr
60 (Hz)
8.24 CFM 14.0 m3/hr |
50 (Hz)
21.8 CFM 37.0 m3/hr
60 (Hz)
21.8 CFM 37.0 m3/hr |
50 (Hz)
51.8 CFM 88.0 m3/hr
60 (Hz)
51.8 CFM 88.0 m3/hr |
Max Water Vapor Pumping Rate (with gas ballast) |
120 g/hr | 80.0 g/hr | 120 g/hr | 240 g/hr |
Ultimate Pressure |
Total With Gas Ballast
2.00 x 10-1 mbar 1.50 x 10-1 Torr
Total Without Gas Ballast
4.00 x 10-2 mbar 3.00 x 10-2 Torr |
Total With Gas Ballast
3.00 x 10-1 mbar 2.25 x 10-1 Torr
Total Without Gas Ballast
5.00 x 10-2 mbar 3.75 x 10-2 Torr |
Total With Gas Ballast
2.00 x 10-1 mbar 1.50 x 10-1 Torr
Total Without Gas Ballast
4.00 x 10-2 mbar 3.00 x 10-2 Torr |
Total With Gas Ballast
1.00 x 10-1 mbar 7.50 x 10-2 Torr
Total Without Gas Ballast
3.00 x 10-2 mbar 2.00 x 10-2 Torr |
Motor Power HP (kW) | 0.94 ( 0.70 ) | 0.60 ( 0.45 ) | 0.94 ( 0.70 ) | 1.72 ( 1.28 ) |
Inlet Flange | KF25 |
KF25 |
KF40 |
KF40 |
Exhaust Flange | KF25 |
KF16 |
KF25 |
KF40 |
Compression Stages | 6 |
6 |
6 |
6 |
Series | Standard |
Standard |
Standard |
Standard |
Weight Lbs (kg) | 66.1 ( 30.0 ) | 51.0 ( 23.0 ) | 70.5 ( 32.0 ) | 165 ( 75.0 ) |
Dimensions in. (mm.) (W/D/H) |
7.60 x 24.7 x 12.7 (193 x 627 x 322 ) | 7.50 x 20.2 x 10.6 (190 x 514 x 270 ) | 7.60 x 24.7 x 12.7 (193 x 627 x 322 ) | 12.6 x 26.4 x 12.8 (319 x 671 x 324 ) |
Lubrication Type | Dry |
Dry |
Dry |
Dry |
Technology Type | Multi-Stage Roots |
Multi-Stage Roots |
Multi-Stage Roots |
Multi-Stage Roots |
Specifications Table
Pump Model | ACP 15 G | ACP 28 G | ACP 40 G | ACP 90 G |
---|---|---|---|---|
Pumping Speeds |
50 (Hz)
8.24 CFM 14.0 m3/hr
60 (Hz)
8.24 CFM 14.0 m3/hr |
50 (Hz)
15.9 CFM 27.0 m3/hr
60 (Hz)
15.9 CFM 27.0 m3/hr |
50 (Hz)
21.8 CFM 37.0 m3/hr
60 (Hz)
21.8 CFM 37.0 m3/hr |
50 (Hz)
51.8 CFM 88.0 m3/hr
60 (Hz)
51.8 CFM 88.0 m3/hr |
Max Water Vapor Pumping Rate (with gas ballast) |
80.0 g/hr | 120 g/hr | 120 g/hr | |
Ultimate Pressure |
Total Without Gas Ballast
3.00 x 10-1 mbar 2.25 x 10-1 Torr |
Total Without Gas Ballast
4.00 x 10-2 mbar 3.00 x 10-2 Torr |
Total Without Gas Ballast
4.00 x 10-2 mbar 3.00 x 10-2 Torr |
Total Without Gas Ballast
3.00 x 10-2 mbar 2.00 x 10-2 Torr |
Motor Power HP (kW) | 0.60 ( 0.45 ) | 0.94 ( 0.70 ) | 0.94 ( 0.70 ) | |
Inlet Flange | KF25 |
KF25 |
KF40 |
KF40 |
Exhaust Flange | KF16 |
KF25 |
KF25 |
KF40 |
Compression Stages | 6 |
6 |
6 |
6 |
Series | Standard |
Standard |
Standard |
Standard |
Weight Lbs (kg) | 51.0 ( 23.0 ) | 66.1 ( 30.0 ) | 70.5 ( 30.0 ) | 165 ( 75.0 ) |
Dimensions in. (mm.) (W/D/H) |
7.50 x 20.2 x 10.6 ( x x ) | 7.36 x 24.1 x 12.4 (187 x 612 x 314 ) | 7.60 x 24.7 x 12.7 (193 x 627 x 322 ) | 12.6 x 26.4 x 12.8 (319 x 671 x 324 ) |
Lubrication Type | Dry |
Dry |
Dry |
Dry |
Technology Type | Multi-Stage Roots |
Multi-Stage Roots |
Multi-Stage Roots |
Multi-Stage Roots |
Specifications Table
Pump Model | ACP 28 (CV/CP) | ACP 40 (CV/CP) |
---|---|---|
Pumping Speeds |
15.9 CFM 27.0 m3/hr
50 (Hz)
15.9 CFM 27.0 m3/hr
60 (Hz)
15.9 CFM 27.0 m3/hr |
21.8 - 22.0 CFM 37.0 - 37.4 m3/hr
50 (Hz)
21.8 CFM 37.0 m3/hr
60 (Hz)
21.8 - 22.0 CFM 37.0 - 37.4 m3/hr |
Max Water Vapor Pumping Rate (with gas ballast) |
700 g/hr | 700 g/hr |
Ultimate Pressure |
Total With Gas Ballast
2.00 x 10-1 - 3.00 x 10-1 mbar 1.50 x 10-1 - 2.25 x 10-1 Torr
Total Without Gas Ballast
4.00 x 10-2 mbar 3.00 x 10-2 Torr |
Total With Gas Ballast
3.00 x 10-1 mbar 2.25 x 10-1 Torr
Total Without Gas Ballast
4.00 x 10-2 mbar 3.00 x 10-2 Torr |
Cooling Method(s) |
Method Convection |
Method Convection |
Motor Power HP (kW) | 0.94 ( 0.70 ) | 0.94 ( 0.70 ) |
Inlet Flange | KF25 |
KF40 |
Exhaust Flange | KF25 |
KF25 |
Compression Stages | 6 |
6 |
Series | Standard |
Standard |
Weight Lbs (kg) | 66.1 ( 30.0 ) | 70.5 ( 32.0 ) |
Dimensions in. (mm.) (W/D/H) |
7.36 x 24.1 x 12.4 (193 x 627 x 322 ) | 7.36 x 24.1 x 12.4 (193 x 627 x 322 ) |
Lubrication Type | Dry |
Dry |
Technology Type | Multi-Stage Roots |
Multi-Stage Roots |
Ordering Table
Pump Model | Inlet Flange | Voltage & Phases | Manual | Description | Part Number | Price | In Stock | Add To Cart | Accessories | |
---|---|---|---|---|---|---|---|---|---|---|
Pump Model | Inlet Flange | Voltage & Phases | Manual | Description | Part Number | Price | In Stock | Add To Cart | Accessories | |
ACP 15 G | KF25 | 200-440 VAC 50/60 HZ, 3-Ø, BARE END PLUG |
Adixen ACP 15 Multi-Stage Roots Pump, |
V5GATSRTRF | $12,100.00 | |||||
ACP 15 | KF25 | 90–254 VAC, 50/60 Hz, 1-Ø, US Plug |
PUMP, |
V5SATSMGAF | $8,860.00 | — | ||||
ACP 15 | KF25 | 110-230 VAC, 50/60 Hz, 1-Ø |
Adixen ACP 15 Multi-Stage Roots Pump, |
V5SATSMGZF | $8,860.00 | |||||
ACP 15 | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
Adixen ACP 15 Multi-Stage Roots Pump, |
V5SATSMTRF | $10,100.00 | |||||
ACP 28 (CV/CP) | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
Adixen ACP 28 Multi-Stage Roots Pump, |
V6GVTSTRHF | $14,900.00 | |||||
ACP 28 (CV/CP) | KF25 | 200–440 VAC, 50/60 Hz, 3-Ø |
Adixen ACP 28 Multi-Stage Roots Pump, |
V6GVTSTRVF | $14,900.00 | |||||
ACP 28 | KF25 | 100–230 VAC, 50/60 Hz, 1-Ø, No Mains Cable | — |
PUMP, |
V6SATSFZMF | P.O.R. | — | |||
ACP 28 | KF25 | 110-230 VAC, 50/60 Hz, 1-Ø |
Adixen ACP 28 Multi-Stage Roots Pump, |
V6SATSGZMF | $11,900.00 | |||||
ACP 28 | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
Adixen ACP 28 Multi-Stage Roots Pump, |
V6SATSTRBF | $13,100.00 | |||||
ACP 28 | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
Adixen ACP 28 Multi-Stage Roots Pump, |
V6SATSTRFF | P.O.R. | |||||
ACP 28 | KF25 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
Adixen ACP 28 Multi-Stage Roots Pump, |
V6SATSTRMF | $13,100.00 | |||||
ACP 40 G | KF40 | 200-440 VAC, 50/60 Hz, 3-Ø, Bare ends |
Adixen ACP 40 Multi-Stage Roots Pump, |
V8GACSTRBF | $16,100.00 | |||||
ACP 40 (CV/CP) | KF40 | 200-440 VAC, 50/60 Hz, 3-Ø, 3-Phase Bare End Plug |
Adixen ACP 40 Multi-Stage Roots Pump, |
V8GVCSTRHF | $16,800.00 | |||||
ACP 40 (CV/CP) | KF40 | 200–440 VAC, 50/60 Hz, 3-Ø |
Adixen ACP 40 Multi-Stage Roots Pump, |
V8GVCSTRVF | $16,800.00 | |||||
ACP 40 | KF40 | 100–230 VAC, 50/60 Hz, 1-Ø, US Plug |
Adixen ACP 40 Multi-Stage Roots Pump, |
V8SACSGAMF | $13,800.00 | |||||
ACP 40 | KF40 | 100–230 VAC, 50/60 Hz, 1-Ø |
Adixen ACP 40 Multi-Stage Roots Pump, |
V8SACSGZMF | $13,800.00 | |||||
ACP 90 G | KF40 | 200-240 VAC, 50/60 Hz, 1-Ø | — |
Adixen ACP 90 Multi-Stage Roots Pump, |
V9GABSAZRF01 | $24,900.00 | ||||
ACP 90 G | KF40 | 200-240 VAC, 50/60 Hz, 1-Ø | — |
Adixen ACP 90 Multi-Stage Roots Pump, |
V9GABSAZRR01 | P.O.R. | ||||
ACP 90 G | KF40 | 200-240 VAC, 50/60 Hz, 3-Ø | — |
Adixen ACP 90 Multi-Stage Roots Pump, |
V9GABSBZRR01 | P.O.R. | ||||
ACP 90 | KF40 | 200-240 VAC, 50/60 Hz, 1-Ø | — |
Adixen ACP 90 Multi-Stage Roots Pump, |
V9SABSAZMR01 | P.O.R. | ||||
ACP 90 | KF40 | 200-240 VAC, 50/60 Hz, 1-Ø | — |
Adixen ACP 90 Multi-Stage Roots Pump, |
V9SABSBZMR01 | P.O.R. |