KJLC^® HCG Heated Series Capacitance Manometers

The KJLC^® Capacitance Manometer line of gas type independent gauges are your best choice for high accuracy pressure measurement and control. Available for full scale ranges with all common flange types. The KJLC manometers use an ultra-pure alumina ceramic diaphragm, which is corrosion proof and allows for better signal stability, faster recovery from atmosphere, short warm up time, and an extraordinary lifetime.

KJLC HCG 45°C Heated Features

• Temperature controlled at 45°C for superior signal stability and repeatability
• Lower CoO (cost of ownership), 50% faster warm up, energy efficient low power consumption
• Easy integration, wide variety of full scales, flanges and interfaces, standard with two set points
• Easy one push button or remote signal zero command, zero offset adjustable
• Diagnostic port for quick service and maintenance
• Two year warranty, longer life time with advanced heating concept and gauge protection
• No long term recalibration due to excellent signal stability and repeatability, even in harsh plasma applications

KJLC HCG 100°C Heated Features

• Excellent performance for high temperature applications
• Temperature controlled at 100°C for superior performance in demanding applications
• Lower CoO (cost of ownership), 50% faster warm up, energy efficient low power consumption
• Easy integration, wide variety of full scales, flanges and interfaces, standard with two set points
• Easy one push button or remote signal zero command, zero offset adjustable
• Diagnostic port for quick service and maintenance
• Two year warranty, longer life time with advanced heating concept and gauge protection
• No long term recalibration due to excellent signal stability and repeatability, even in harsh plasma applications

Applications

• Etch, CVD, PVD and other semiconductor production processes
• Chemical and corrosive vacuum processes
• General thin film and vacuum processes requiring gauge protection
• Data storage and display manufacturing equipment
• Reference sensor for monitoring of test instruments according to international standards
• Transfer standard for traceability measurements
• Industrial vacuum equipment

Dimensional Drawings

Configuration Options

This chart is to help you review all the available options for the KJLC HCG Heated Series Capacitance Manometers. Please see below for an interactive product builder to assemble the options into a part number ready for order.

Ordering Code Example: HCG045-HT-3-1

Note: Below you will find common methods to control your gauge / transducer. Please note that not all controllers are listed for every gauge / transducer. If you do not see the controller that you need, please contact your local KJLC Sales Representative.

• Powered via a controller. Suggested Controllers:
  • KJLC SPARC (Only for Ambient version.)
• Connected directly to a PLC (data acquisition system) or computer. The interconnector cable will need to be supplied by the end user. The pinouts for this unit can be found in the manual.

Compatible Controller	Description	Components Needed	Schematic Download
KJLC SPARC	Cost-effective, Single unit power supply and display.	KJL-SPARC, KJLC ACG, FCC68/DB15 adaptor, and power cable (if outside of US). 10ft. interconnect cable included.