Silicon (Si (P-type)) Pieces Evaporation Materials

Silicon (Si (P-type)) Pieces Overview

We sell these pellets and pieces by unit weight for evaporation use in deposition processes. These approximate materials prices are published to provide budgetary guidelines. Actual prices can vary and may be higher or lower, as determined by availability and market fluctuations. To speak to someone directly about current pricing, please click here .

Silicon (Si (P-type)) General Information

Silicon is one of the most extensively used elements in the world. It is dark gray and semi-metallic with a bluish tinge. It has a melting point of 1,410°C, a density of 2.32 g/cc, and a vapor pressure of 10^-4 Torr at 1,337°C. It is a brittle metalloid which can chip easily. Silicon is a semiconductor which is heavily utilized in the electronics and computer industries. It is often doped with arsenic, phosphorus, or boron depending on the application. It is evaporated under vacuum for circuit device, data storage device, and battery fabrication.

Silicon (Si (P-type)) Specifications

‡ One run only.

Thermal Evaporation of Silicon (Si (P-type))

Thermally evaporating silicon is difficult, if not, impossible.

We refer to a material's evaporation temperature as the temperature required to achieve a vapor pressure of 10^-2 Torr. At this vapor pressure, a high deposition rate is possible in a system that has a normal source-to-substrate geometry. In order to reach this vapor pressure, silicon must be heated to ~1,600°C. Because this temperature is higher than its melting point (1,410°C), silicon will evaporate from liquid form.

However, liquid silicon reacts with refractory metals. We have attempted to thermally evaporate silicon from a thick-gauged tungsten boat (0.025" thickness) with little success. The liquid silicon wet and alloyed with the boat, causing it to fail before a reasonable layer could be deposited. We also attempted to use a shielded crucible heater with a graphite crucible. This approach failed as well because the liquid silicon reacted with the crucible.

As it stands, we do not have a good source recommendation for thermally evaporating silicon and generally recommend e-beam evaporation or sputtering for depositing silicon films. However, the e-beam evaporation process can be complicated as well.

E-beam Evaporation of Silicon (Si (P-type))

Silicon is rated as fair for e-beam evaporation.

We refer to a material's evaporation temperature as the temperature required to achieve a vapor pressure of 10^-2 Torr. At this vapor pressure, a high deposition rate is possible in a system that has a normal source-to-substrate geometry. In order to reach this vapor pressure, silicon must be heated to ~1,600°C. Because this temperature is higher than its melting point (1,410°C), silicon will evaporate from liquid form.

We recommend using either a FABMATE^® or tantalum crucible liner for e-beam evaporating silicon. Crucible liners will need to be replaced fairly often because liquid silicon has the tendency to damage liners. When silicon melts, it will mechanically bond to the inner walls of the crucible liner. Upon cooling or re-heating, the difference in thermal expansion/contraction of the silicon in contact with the liner can produce enough stress to break the liner. We also find that the melt level of a material in the crucible directly affects the success of the crucible liner. Overfilling the crucible will cause the material to spill over and create an electrical short between the liner and the hearth. The outcome is cracking in the crucible. This is the most common cause of crucible liner failure. Placing too little material in the crucible or evaporating too much material before refilling can be detrimental to the process as well. When the melt level is below 30%, the e-beam is likely to strike the bottom or walls of the crucible which immediately results in breakage. Our recommendation is to maintain a melt level between 30-80% and slowly ramp power up and down to prevent these complications. However, even when following these guidelines, the liners will still need to be replaced frequently.

It is important to note that the FABMATE^® liners will likely survive only one evaporation run. It is possible to get multiple runs from tantalum liners. However, tantalum liners are generally more expensive than the FABMATE^® ones. Users will need to consider the extra life of the tantalum liner versus the extra cost to determine if it is more economical to purchase additional FABMATE^® liners and replace after each run.

E-beam Crucible Liner Fill Rate Calculator

Instructions for use:
Input the Crucible Liner Volume, Select Material (if not available in menu, manually input Material Density in g/cm³), and input fill rate %.

KJLC recommends a fill rate between 67-75%. Overfilling the crucible will cause the material to spill over and create an electrical short between the liner and the hearth causing the crucible to crack. Placing too little material in the crucible or allowing the melt level to get too low can be detrimental to the process as well. When the melt level is below 30%, the e-beam is likely to strike the bottom or walls of the crucible which immediately results in breakage.

The fill rate above assumes that the material is fully melted and does not take into account packing density. It should be noted that the crucible liner may need to be loaded multiple times, pre-melted, and topped off in order to achieve the final desired melt level/fill rate. When loading the crucible, do not load more than 80% of the height of the crucible liner.

This calculator is for estimation purposes only.

---

Crucible Liner Volume (in cc):

Material:
-- Please Select -- Aluminum Aluminum Antimonide Aluminum Arsenide Aluminum Bromide Aluminum Carbide Aluminum Fluoride Aluminum Nitride Aluminum Oxide Aluminum Phosphide Aluminum, 1% Copper Aluminum, 1% Silicon Antimony Antimony Oxide Antimony Selenide Antimony Sulfide Antimony Telluride Arsenic Arsenic Oxide Arsenic Selenide Arsenic Sulfide Arsenic Telluride Barium Barium Chloride Barium Fluoride Barium Oxide Barium Sulfide Barium Titanate Beryllium Beryllium Carbide Beryllium Chloride Beryllium Fluoride Beryllium Oxide Bismuth Bismuth Fluoride Bismuth Oxide Bismuth Selenide Bismuth Sulfide Bismuth Telluride Bismuth Titanate Boron Boron Carbide Boron Nitride Boron Oxide Boron Sulfide Cadmium Cadmium Antimonide Cadmium Arsenide Cadmium Bromide Cadmium Chloride Cadmium Fluoride Cadmium Iodide Cadmium Oxide Cadmium Selenide Cadmium Sulfide Cadmium Telluride Calcium Calcium Fluoride Calcium Oxide Calcium Silicate Calcium Sulfide Calcium Titanate Calcium Tungstate Carbon Cerium Cerium (III) Oxide Cerium (IV) Oxide Cerium Fluoride Cesium Cesium Bromide Cesium Chloride Cesium Fluoride Cesium Hydroxide Cesium Iodide Chiolite Chromium Chromium (II) Bromide Chromium Boride Chromium Carbide Chromium Chloride Chromium Oxide Chromium Silicide Cobalt † Cobalt Bromide Cobalt Chloride Cobalt Oxide Copper Copper Chloride Copper Oxide Copper Sulfide Cryolite Dysprosium Dysprosium Fluoride Dysprosium Oxide Erbium Erbium Fluoride Erbium Oxide Europium Europium Fluoride Europium Oxide Europium Sulfide Gadolinium † Gadolinium Carbide Gadolinium Oxide Gallium Gallium Antimonide Gallium Arsenide Gallium Nitride Gallium Oxide Gallium Phosphide Germanium Germanium (II) Oxide Germanium (III) Oxide Germanium Nitride Germanium Telluride Glass, Schott^® 8329 Gold Hafnium Hafnium Boride Hafnium Carbide Hafnium Nitride Hafnium Oxide Hafnium Silicide Holmium Holmium Fluoride Holmium Oxide Inconel^® Indium Indium (I) Oxide Indium (I) Sulfide Indium (II) Sulfide Indium (II) Telluride Indium (III) Oxide Indium (III) Sulfide Indium (III) Telluride Indium Antimonide Indium Arsenide Indium Nitride Indium Phosphide Indium Selenide Indium Tin Oxide Iridium Iron (II) Oxide Iron (III) Oxide Iron † Iron Bromide Iron Chloride Iron Iodide Iron Sulfide Kanthal Lanthanum Lanthanum Boride Lanthanum Bromide Lanthanum Fluoride Lanthanum Oxide Lead Lead Bromide Lead Chloride Lead Fluoride Lead Iodide Lead Oxide Lead Selenide Lead Stannate Lead Sulfide Lead Telluride Lead Titanate Lithium Lithium Bromide Lithium Chloride Lithium Fluoride Lithium Iodide Lithium Niobate Lithium Oxide Lutetium Lutetium Oxide Magnesium Magnesium Aluminate Magnesium Bromide Magnesium Chloride Magnesium Fluoride Magnesium Iodide Magnesium Oxide Manganese Manganese (II) Oxide Manganese (III) Oxide Manganese (IV) Oxide Manganese Bromide Manganese Chloride Manganese Sulfide Mercury Mercury Sulfide Molybdenum Molybdenum Boride Molybdenum Carbide Molybdenum Oxide Molybdenum Silicide Molybdenum Sulfide Neodymium Neodymium Fluoride Neodymium Oxide Nichrome IV^® Nickel † Nickel Bromide Nickel Chloride Nickel Oxide Nickel/Iron † Nimendium † Niobium Niobium (II) Oxide Niobium (III) Oxide Niobium (V) Oxide Niobium Boride Niobium Carbide Niobium Nitride Niobium Telluride Niobium-Tin Osmium Osmium Oxide Palladium Palladium Oxide Parylene Permalloy^® † Phosphorus Phosphorus Nitride Platinum Platinum Oxide Plutonium Polonium Potassium Potassium Bromide Potassium Chloride Potassium Fluoride Potassium Hydroxide Potassium Iodide Praseodymium Praseodymium Oxide PTFE Radium Rhenium Rhenium Oxide Rhodium Rubidium Rubidium Chloride Rubidium Iodide Ruthenium Samarium Samarium Oxide Samarium Sulfide Scandium Scandium Oxide Selenium Silicon Silicon (II) Oxide Silicon (IV) Oxide Silicon (N-type) Silicon (P-type) Silicon Boride Silicon Carbide Silicon Nitride Silicon Selenide Silicon Sulfide Silicon Telluride Silver Silver Bromide Silver Chloride Silver Iodide Sodium Sodium Bromide Sodium Chloride Sodium Cyanide Sodium Fluoride Sodium Hydroxide Spinel Strontium Strontium Chloride Strontium Fluoride Strontium Oxide Strontium Sulfide Strontium Titanate Sulfur Supermalloy^® † Tantalum Tantalum Boride Tantalum Carbide Tantalum Nitride Tantalum Pentoxide Tantalum Sulfide Technetium Tellurium Terbium Terbium Fluoride Terbium Oxide Terbium Peroxide Thallium Thallium Bromide Thallium Chloride Thallium Iodide Thallium Oxide Thorium Thorium Bromide Thorium Carbide Thorium Fluoride Thorium Oxide Thorium Oxyfluoride Thorium Sulfide Thulium Thulium Oxide Tin Tin Oxide Tin Selenide Tin Sulfide Tin Telluride Titanium Titanium (II) Oxide Titanium (III) Oxide Titanium (IV) Oxide Titanium Boride Titanium Carbide Titanium Nitride Tungsten Tungsten Boride Tungsten Carbide Tungsten Disulfide Tungsten Oxide Tungsten Selenide Tungsten Silicide Tungsten Telluride Uranium Uranium (II) Sulfide Uranium (III) Oxide Uranium (IV) Oxide Uranium (IV) Sulfide Uranium Carbide Uranium Fluoride Uranium Phosphide Vanadium Vanadium (IV) Oxide Vanadium (V) Oxide Vanadium Boride Vanadium Carbide Vanadium Nitride Vanadium Silicide Ytterbium Ytterbium Fluoride Ytterbium Oxide Yttrium Yttrium Aluminum Oxide Yttrium Fluoride Yttrium Oxide Zinc Zinc Antimonide Zinc Bromide Zinc Fluoride Zinc Nitride Zinc Oxide Zinc Selenide Zinc Sulfide Zinc Telluride Zirconium Zirconium Boride Zirconium Carbide Zirconium Nitride Zirconium Oxide Zirconium Silicate Zirconium Silicide
- or -
Density of the material in g/cm³:

Fill Rate %:

Result

See highlighted results that match your result in the table below.

Material Needed to Deposit a 1 Micron Film Calculator

Instructions for use:
Select source type, input distance from source to substrate and Select Material (if not available in menu, manually input Material Density in kg/m³).

This calculator is for estimation purposes only. The estimated mass is that needed to produce a desired film thickness (1 micron in this case) on a flat substrate at a point directly above the source, accounting for the approximate plume distribution of the selected source type. It does not account for any expected nonuniformity in thickness over a larger substrate area. More complex geometries, e.g. those with offset and/or tilted sources, may have higher material requirements. The estimated mass is for the film deposition only; additional margin should be included to account for loss during ramp-up, burn-in, stabilisation and ramp-down.

---

Source:
Point Directional - Thermal Boat Directional - EBeam Directional - LTE/HTE

Distance of source to substrate (in cm):

Material:
-- Please Select -- Aluminum Aluminum Antimonide Aluminum Arsenide Aluminum Bromide Aluminum Carbide Aluminum Fluoride Aluminum Nitride Aluminum Oxide Aluminum Phosphide Aluminum, 1% Copper Aluminum, 1% Silicon Antimony Antimony Oxide Antimony Selenide Antimony Sulfide Antimony Telluride Arsenic Arsenic Oxide Arsenic Selenide Arsenic Sulfide Arsenic Telluride Barium Barium Chloride Barium Fluoride Barium Oxide Barium Sulfide Barium Titanate Beryllium Beryllium Carbide Beryllium Chloride Beryllium Fluoride Beryllium Oxide Bismuth Bismuth Fluoride Bismuth Oxide Bismuth Selenide Bismuth Sulfide Bismuth Telluride Bismuth Titanate Boron Boron Carbide Boron Nitride Boron Oxide Boron Sulfide Cadmium Cadmium Antimonide Cadmium Arsenide Cadmium Bromide Cadmium Chloride Cadmium Fluoride Cadmium Iodide Cadmium Oxide Cadmium Selenide Cadmium Sulfide Cadmium Telluride Calcium Calcium Fluoride Calcium Oxide Calcium Silicate Calcium Sulfide Calcium Titanate Calcium Tungstate Carbon Cerium Cerium (III) Oxide Cerium (IV) Oxide Cerium Fluoride Cesium Cesium Bromide Cesium Chloride Cesium Fluoride Cesium Hydroxide Cesium Iodide Chiolite Chromium Chromium (II) Bromide Chromium Boride Chromium Carbide Chromium Chloride Chromium Oxide Chromium Silicide Cobalt † Cobalt Bromide Cobalt Chloride Cobalt Oxide Copper Copper Chloride Copper Oxide Copper Sulfide Cryolite Dysprosium Dysprosium Fluoride Dysprosium Oxide Erbium Erbium Fluoride Erbium Oxide Europium Europium Fluoride Europium Oxide Europium Sulfide Gadolinium † Gadolinium Carbide Gadolinium Oxide Gallium Gallium Antimonide Gallium Arsenide Gallium Nitride Gallium Oxide Gallium Phosphide Germanium Germanium (II) Oxide Germanium (III) Oxide Germanium Nitride Germanium Telluride Glass, Schott^® 8329 Gold Hafnium Hafnium Boride Hafnium Carbide Hafnium Nitride Hafnium Oxide Hafnium Silicide Holmium Holmium Fluoride Holmium Oxide Inconel^® Indium Indium (I) Oxide Indium (I) Sulfide Indium (II) Sulfide Indium (II) Telluride Indium (III) Oxide Indium (III) Sulfide Indium (III) Telluride Indium Antimonide Indium Arsenide Indium Nitride Indium Phosphide Indium Selenide Indium Tin Oxide Iridium Iron (II) Oxide Iron (III) Oxide Iron † Iron Bromide Iron Chloride Iron Iodide Iron Sulfide Kanthal Lanthanum Lanthanum Boride Lanthanum Bromide Lanthanum Fluoride Lanthanum Oxide Lead Lead Bromide Lead Chloride Lead Fluoride Lead Iodide Lead Oxide Lead Selenide Lead Stannate Lead Sulfide Lead Telluride Lead Titanate Lithium Lithium Bromide Lithium Chloride Lithium Fluoride Lithium Iodide Lithium Niobate Lithium Oxide Lutetium Lutetium Oxide Magnesium Magnesium Aluminate Magnesium Bromide Magnesium Chloride Magnesium Fluoride Magnesium Iodide Magnesium Oxide Manganese Manganese (II) Oxide Manganese (III) Oxide Manganese (IV) Oxide Manganese Bromide Manganese Chloride Manganese Sulfide Mercury Mercury Sulfide Molybdenum Molybdenum Boride Molybdenum Carbide Molybdenum Oxide Molybdenum Silicide Molybdenum Sulfide Neodymium Neodymium Fluoride Neodymium Oxide Nichrome IV^® Nickel † Nickel Bromide Nickel Chloride Nickel Oxide Nickel/Iron † Nimendium † Niobium Niobium (II) Oxide Niobium (III) Oxide Niobium (V) Oxide Niobium Boride Niobium Carbide Niobium Nitride Niobium Telluride Niobium-Tin Osmium Osmium Oxide Palladium Palladium Oxide Parylene Permalloy^® † Phosphorus Phosphorus Nitride Platinum Platinum Oxide Plutonium Polonium Potassium Potassium Bromide Potassium Chloride Potassium Fluoride Potassium Hydroxide Potassium Iodide Praseodymium Praseodymium Oxide PTFE Radium Rhenium Rhenium Oxide Rhodium Rubidium Rubidium Chloride Rubidium Iodide Ruthenium Samarium Samarium Oxide Samarium Sulfide Scandium Scandium Oxide Selenium Silicon Silicon (II) Oxide Silicon (IV) Oxide Silicon (N-type) Silicon (P-type) Silicon Boride Silicon Carbide Silicon Nitride Silicon Selenide Silicon Sulfide Silicon Telluride Silver Silver Bromide Silver Chloride Silver Iodide Sodium Sodium Bromide Sodium Chloride Sodium Cyanide Sodium Fluoride Sodium Hydroxide Spinel Strontium Strontium Chloride Strontium Fluoride Strontium Oxide Strontium Sulfide Strontium Titanate Sulfur Supermalloy^® † Tantalum Tantalum Boride Tantalum Carbide Tantalum Nitride Tantalum Pentoxide Tantalum Sulfide Technetium Tellurium Terbium Terbium Fluoride Terbium Oxide Terbium Peroxide Thallium Thallium Bromide Thallium Chloride Thallium Iodide Thallium Oxide Thorium Thorium Bromide Thorium Carbide Thorium Fluoride Thorium Oxide Thorium Oxyfluoride Thorium Sulfide Thulium Thulium Oxide Tin Tin Oxide Tin Selenide Tin Sulfide Tin Telluride Titanium Titanium (II) Oxide Titanium (III) Oxide Titanium (IV) Oxide Titanium Boride Titanium Carbide Titanium Nitride Tungsten Tungsten Boride Tungsten Carbide Tungsten Disulfide Tungsten Oxide Tungsten Selenide Tungsten Silicide Tungsten Telluride Uranium Uranium (II) Sulfide Uranium (III) Oxide Uranium (IV) Oxide Uranium (IV) Sulfide Uranium Carbide Uranium Fluoride Uranium Phosphide Vanadium Vanadium (IV) Oxide Vanadium (V) Oxide Vanadium Boride Vanadium Carbide Vanadium Nitride Vanadium Silicide Ytterbium Ytterbium Fluoride Ytterbium Oxide Yttrium Yttrium Aluminum Oxide Yttrium Fluoride Yttrium Oxide Zinc Zinc Antimonide Zinc Bromide Zinc Fluoride Zinc Nitride Zinc Oxide Zinc Selenide Zinc Sulfide Zinc Telluride Zirconium Zirconium Boride Zirconium Carbide Zirconium Nitride Zirconium Oxide Zirconium Silicate Zirconium Silicide
- or -
Density of the material in kg/m³:

Multiplier:

Mass for 1 micron layer