KJLC^® ACG Ambient Series Capacitance Manometers

The KJLC^® Capacitance Manometer line of gas type independent gauges are your best choice for high accuracy pressure measurement and control. Available for full scale ranges with all common flange types. The KJLC manometers use an ultra-pure alumina ceramic diaphragm, which is corrosion proof and allows for better signal stability, faster recovery from atmosphere, short warm up time, and an extraordinary lifetime.

Features

• Full scale ranges from 100 mTorr - 1000 Torr
• Fast stability after power on
• Fast recovery from atmospheric pressure
• Corrosion resistant ceramic sensor
• Excellent long term signal stability
• Temperature compensated
• Sensor double protected from contamination
• One pushbutton zero function
• Wide range power supply
• 2 set points
• RS232 interface
• Clean room compliant

Applications

• Etch, CVD, PVD and other semiconductor production processes
• Chemical and corrosive vacuum processes
• General thin film and vacuum processes requiring gauge protection
• Data storage and display manufacturing equipment
• Reference sensor for monitoring of test instruments according to international standards
• Transfer standard for traceability measurements
• Industrial vacuum equipment

Dimensional Drawings

Configuration Options

This chart is to help you review all the available options for the KJLC ACG Ambient Series Capacitance Manometers. Please see below for an interactive product builder to assemble the options into a part number ready for order.

Ordering Code Example: ACG-HT-3-1

Note: Below you will find common methods to control your gauge / transducer. Please note that not all controllers are listed for every gauge / transducer. If you do not see the controller that you need, please contact your local KJLC Sales Representative.

• Powered via a controller. Suggested Controllers:
  • KJLC SPARC (Only for Ambient version.)
• Connected directly to a PLC (data acquisition system) or computer. The interconnector cable will need to be supplied by the end user. The pinouts for this unit can be found in the manual.

Compatible Controller	Description	Components Needed	Schematic Download
KJLC SPARC	Cost-effective, Single unit power supply and display.	KJL-SPARC, KJLC ACG, FCC68/DB15 adaptor, and power cable (if outside of US). 10ft. interconnect cable included.